Basic blue base wax

With this rotary brush starter set, you get the two most important wax brushes to professionally wax your skis or snowboard from now on.This high-quality rotary brush set consists of a handle with a short axle including work protection, rotary brush Nylon, and rotary brush Horsehair. Product features:Handle part made of anodized aluminumStainless steel axle, double ball-bearing with sealed bearings for dust and moisture protectionCompatible with brushes from other manufacturersHexagon socket 10 mmBrush size 115 mm widePractical tip from our ski workshop:For base cleaning, we use the brass rotary brush before the first waxing (not included in this set). After scraping off the excess wax, we brush the base structure with the hard horsehair brush and then polish the base with the soft nylon brush again.If you use fluorine powder for corking, we recommend the cork brush for this purpose (not included in this set. Available either individually or in the "World Cup" professional set). Work with rotary brushes with little pressure and speeds up to approximately 1,000 revolutions per minute!

Always wanted to wax your skis or board yourself?With this affordable yet high-quality waxing iron, you can start right away!All details at a glance:Power: 230 V | 850 WattsTemperature range: 80°C to 140°C easily adjustable via control dialPlate: Special grooved structure and thick plate for even wax applicationSize: 190 x 120 x 120 mm

This wax brush set, featuring a hard horsehair brush, a softer nylon brush, and a bronze brush, is the perfect basic equipment for those who want to wax their skis, cross-country skis, or snowboard themselves.We recommend cleaning the base with the bronze brush in the first step. By making even strokes from the ski tip to the end and applying light pressure, you can effectively remove dirt and wax residues from the base. This allows the base to better absorb the new wax.After ironing in the new wax, allowing it to cool, and scraping it off with a plexiglass scraper, use the horsehair brush to brush out the base structure. Once the excess wax is brushed out, the softer nylon brush comes into play. Thanks to its softer bristles, the base structure is freed from any remaining wax residues, and the base is polished. Done! Now, head out to the trail or slope!Pro Tip: Have you tried our rotobrushes? With them, you can wax your skis or board like the pros in the World Cup! Product Features Horsehair Brush:black lacqueredhard horsehair bristlesbrush size 125 mm x 72 mmProduct Features Nylon Brush:black lacqueredsoft nylon bristlesbrush size 125 mm x 72 mmProduct Features Bronze Brush:black lacqueredbronze bristlesbrush size 125 mm x 72 mmPractical tip from our ski workshop:For a final finish and to achieve a perfect result, we use the Micro Steel Brush in the last step.

With this, you can wax your skis or board like a pro. Unlike many cheap irons, this professional waxing iron features a milled 15mm aluminum plate for even better wax distribution and microprocessor-controlled temperature monitoring.This keeps the set temperature with only minimal fluctuations of +/- 2°C. Thus, you always have the exactly right temperature and won’t burn the base. All details at a glance:Waxing iron with 230 V power 850 watts 50 HzTemperature setting from 90°C to 160°C in 10 stagesMicroprocessor-controlled temperature monitoring, temperature is monitored 10 times per secondmax. temperature fluctuation +/- 2° Chigh-quality 15 mm thick aluminum die-cast plate

This high-quality wax scraper made of polycarbonate is significantly more stable than many cheap acrylic or plexiglass scrapers. With its 3 different radii, it can easily clean the center groove of cross-country skis or, through the side cutout, the edge of alpine skis. Especially sharp-edged - for easy removal of hot wax.Size: 150mm x 60mm x 5mm