File angle edge tuner
€43.90
Available, delivery time: 1-3 days
Product information "File angle edge tuner"
You can individually adjust the file angle from 88° to 85° using various spacers.
With just a few strokes, the side edge will be flat and sharp again.
The edge tuner is very stable with its 3mm thick stainless steel plate and weighs 250g, making it comfortable to handle.
The large opening for chip removal prevents shavings from being pressed into the base.
Which setting is the right one?
In general, it can be said: The sharper the angle of the edges, the more aggressive the edge. This means the skis grip better and respond faster than with blunter edges. The smaller you set the angle, the sharper and more aggressive the ski becomes.
For recreational skiers, we sharpen the base edges at 0.5° and the side edges at 88° in our workshop. This gives the edges a very good compromise between agility and aggressiveness.
Which file is the right one?
If the edge is heavily damaged, the burrs must be removed with an aluminum oxide stone before grinding. Then, we recommend using the medium file for initial grinding. After a few even strokes and an initial flat grind, we recommend switching to the fine file.
Now, the edges will be ground flat properly.
HABRUS
Johann Brunner
Talstraße 36
D-94209 Regen
Email : info @ habrus.de
Login
Passend für folgende Feilen
With the short medium file, you have a high-quality finishing file to sharpen the side edges of your skis or snowboard. If the edge has strong burrs or has developed some rust, we recommend using the aluminum oxide stone before filing. Then, in the first pass, sharpen the edge with this medium file.Simply clamp the file in the edge tuner and use long, even strokes to flatten the side edges.After that, switch to the fine file and make the edge perfectly flat. Size: 100mm x 25mmCut 0
With the short fine file, you have a high-quality finishing file to sharpen the side edges of your skis or snowboard. If the edge has strong burrs or has developed some rust, we recommend using the aluminum oxide stone before filing. Then, in the first pass, sharpen the edge with a medium file. Simply clamp the file in the edge tuner and use long, even strokes to flatten the side edges.After that, switch to this fine file and make the edge perfectly flat.Size: 100mm x 25mm x 5mm
Deburr the edges of your skis or snowboard with the Aluminum Oxide stone in just a few strokes.Preparing the edges with an Aluminum Oxide stone before filing significantly increases the lifespan of your files.You can also use the stone effectively to remove rust.Suitable for edge grinders or variable-angle guides.Grit: 400Size: 80 x 20 x 5 mm
Quality diamond file for use in edge sharpeners and file angles.To remove hardening on the edge, it creates a top surface again to achieve a sharp edge for as long as possible. Size 100 x 25 x 5 mm (fits in almost all edge sharpeners and file angles) Grit 300 medium/ blue
Empfohlenes Zubehör
The proven special tool for removing sidewalls. If you want to sharpen the side edges of your skis or snowboard and notice while filing that you're not hitting the edge properly anymore, but instead removing plastic from the ski/board sides, you need to trim this plastic before sharpening the edges. This sidewall trimmer is perfect for that! Height adjustable Side adjustable Reversible carbide blade
The proven special tool for removing sidewalls. If you want to sharpen the side edges of your skis or snowboard and notice while filing that you're not hitting the edge properly anymore, but instead removing plastic from the ski/board sides, you need to trim this plastic before sharpening the edges. This sidewall trimmer is perfect for that! Height adjustable Side adjustable Reversible carbide blade
Für die belagseitige Kante
With the Vario angle guide and a suitable file (not included), you can easily tune the base edge of your alpine skis or snowboard. You can individually adjust the angle guide from 0° to 3° in 0.5° increments. With just a few strokes, the base edge will be flat and sharp again. Which setting is the right one?In general, it can be said: The sharper the angle of the edges, the more aggressive the edge. This means the skis grip better and engage faster than with blunter edges. The more the edge is tuned, the less aggressive it becomes, but the ski will be more agile. For recreational skiers, we sharpen the base edges at 0.5° and the side edges at 88° in our workshop. This gives the edges a very good compromise between agility and aggressiveness. Which file is the right one?If the edge is heavily damaged, the burrs must be removed with an aluminum oxide stone before grinding. Then, we recommend using the coarse side of the multi-file. After a few even strokes and an initial flat grind, we recommend switching to the fine side of the multi-file. Now, the edges will be ground flat properly.
With the long multi-file, you have a high-quality all-purpose file to sharpen the base edges of your skis or snowboard. If the edge has strong burrs or has developed some rust, we recommend using the aluminum oxide stone before filing. Then, in the first pass, use the coarse side of the file to sharpen the edge. After that, switch to the fine side of the file to make the edge perfectly flat. Size: 200 mm x 20 mmCut 5 and 7
Surface plane for processing the surface after the surface repair.If you have filled the damage in the surface with our repair strips, the cooled and excess material must be removed again.For this, in the first step, use our high-quality surface plane with an integrated but replaceable cross-file.In the second step, level the surface with our stainless steel blade. For larger repair works, it is recommended to restructure the surface with a structuring device.Price is for the plane including the milling fileThe file is replaceable and can be used on both sidesDimensions of the milling file: 300 mm x 30 mm, 9 TPI
Surface plane for processing the surface after the surface repair.If you have filled the damage in the surface with our repair strips, the cooled and excess material must be removed again.For this, in the first step, use our high-quality surface plane with an integrated but replaceable cross-file.In the second step, level the surface with our stainless steel blade. For larger repair works, it is recommended to restructure the surface with a structuring device.Price is for the plane including the milling fileThe file is replaceable and can be used on both sidesDimensions of the milling file: 300 mm x 30 mm, 9 TPI