This wax brush with fine bronze bristles is perfect for cleaning and preparing the ski or snowboard base before waxing. Even after brushing with a horsehair brush, this fine bronze brush is ideal for removing any remaining wax residue from the base structure.You can also find other hand brushes for brushing the base after waxing here in the shop. Additionally, we have affordable brush sets available where you can save even more.Pro Tip: Have you tried our rotary brushes? With them, you wax your skis or board like the pros in the World Cup! Product Features:black lacqueredfine bronze bristlesbrush size 125 mm x 72 mmPractical tip from our ski workshop:For base cleaning, we use the brass rotary brush before the first waxing (alternatively, the bronze or fine bronze hand brush). After scraping off excess wax, we brush the base structure of the board or skis with the stiff horsehair brush (sold separately) and then polish the base with the soft nylon brush (sold separately).For a final finish and to achieve a perfect result, we use the Micro Steel Brush again (sold separately).

This rotary brush with brass bristles is perfect for cleaning the ski or snowboard base. This prepares the base for waxing and allows it to better absorb the new ski or snowboard wax.You can also find other rotary brushes and the corresponding handle here in the shop. Additionally, we have affordable brush sets available where you can save even more.Product Features:Hexagonal receptacle 10 mmBrush size 115 mm widePractical tip from our ski workshop:For base cleaning, we use the brass rotary brush before the first waxing. After scraping off excess wax, we brush the base structure of the board or skis with the stiff horsehair brush (sold separately) and then polish the base with the soft nylon brush (sold separately) again.For a final finish and to achieve a perfect result, we use the Micro Steel Brush again (sold separately). Work with rotary brushes at low pressure and speeds up to approximately 1,000 revolutions per minute!

You need this professional cork brush to cork high-quality fluorine powder into the base of your skis or board.The cork rotary brush is the perfect complement to your wax brush set. You can also find other rotary brushes and the corresponding handle here in the shop.Product Features:Diameter 65mmHexagonal receptacle 10 mmBrush size 115 mm widePractical tip from our ski workshop:For base cleaning, we use the brass rotary brush before the first waxing (sold separately). After scraping off excess wax, we brush the base structure of the board or skis with the stiff horsehair brush (sold separately) and then polish the base with the soft nylon brush (sold separately) again. If you are using fluorine powder for corking, we recommend using this cork brush for it.Work with rotary brushes at low pressure and speeds up to approximately 1,000 revolutions per minute!

This rotary brush with soft fleece is perfect for applying fluorine powders or pastes to the ski or snowboard base. With the help of the rotary brush, wax is applied evenly and worked into the microstructure of the base.You can also find other rotary brushes and the corresponding handle here in the shop. Additionally, we have affordable brush sets available where you can save even more. Product Features:Hexagonal receptacle 10 mmBrush size 115 mm wideDiameter 80 mmPractical tip from our ski workshop: Especially for processing speed pastes, the fleece brush is particularly suitable: we apply the paste evenly to the base with a lint-free cloth (e.g., microfiber) and then work the pastes into the base with the fleece brush. Work with rotary brushes at low pressure and speeds up to approximately 1,000 revolutions per minute!

This handle, including hand protection, fits all brushes in our program and most rotary brushes from other manufacturers due to its 10mm hexagonal receptacle. Full metal version made of stainless steel, handle piece made of anodized aluminum, double ball-bearing, proven click-lock system from the World Cup, meaning the axis does not need to be removed from the drill chuck to change the brush.With an axis for Habrus brushes with a length of 115 mm, we also have axes for brushes from other manufacturers in the program, e.g., 100 mm and 140 mm.Practical tip from our ski workshop:For base cleaning, we use the brass rotary brush before the first waxing (sold separately). After scraping off excess wax, we brush the base structure of the board or skis with the stiff horsehair brush (sold separately) and then polish the base with the soft nylon brush (sold separately) again. If you are using fluorine powder for corking, we recommend using the cork brush for this (sold separately). Work with rotary brushes at low pressure and speeds up to approximately 1,000 revolutions per minute!

This rotary brush with hard horsehair bristles is ideal for brushing the base of your skis or snowboard. Ideally, use a softer nylon brush afterward to polish the base once again and remove any remaining wax. If you prefer to work with just one brush, this horsehair brush is your best choice.You can also find other rotary brushes and the corresponding handle here in the shop. Additionally, we have affordable brush sets in stock where you can save extra.Product Features:Hexagonal socket 10 mmBrush size 115 mm widePractical tip from our ski workshop:For base cleaning, we use the brass rotary brush before the first waxing (available separately). After scraping off excess wax, we brush the base structure of the board or skis with the hard horsehair brush and then polish the base with the soft nylon brush (available separately) once again.For a final finish and to achieve a perfect result, we then use this Micro Steel Brush again.Work with rotary brushes with little pressure and speeds up to approximately 1,000 revolutions per minute!

This rotary brush with soft nylon is perfect for brushing and polishing the ski or snowboard base. Ideally, use a harder horsehair brush before the nylon brush to remove excess wax from the base.You can also find other rotary brushes and the corresponding handle here in the shop. Additionally, we have affordable brush sets available where you can save even more.Product Features:Hexagonal receptacle 10 mmBrush size 115 mm widePractical tip from our ski workshop:For base cleaning, we use the brass rotary brush before the first waxing (sold separately). After scraping off excess wax, we brush the base structure of the board or skis with the stiff horsehair brush (sold separately) and then polish the base with the soft nylon brush again.For a final finish and to achieve a perfect result, we use the Micro Steel Brush again. Work with rotary brushes at low pressure and speeds up to approximately 1,000 revolutions per minute!

With this rotary brush starter set, you get the two most important wax brushes to professionally wax your skis or snowboard from now on.This high-quality rotary brush set consists of a handle with a short axle including work protection, rotary brush Nylon, and rotary brush Horsehair. Product features:Handle part made of anodized aluminumStainless steel axle, double ball-bearing with sealed bearings for dust and moisture protectionCompatible with brushes from other manufacturersHexagon socket 10 mmBrush size 115 mm widePractical tip from our ski workshop:For base cleaning, we use the brass rotary brush before the first waxing (not included in this set). After scraping off the excess wax, we brush the base structure with the hard horsehair brush and then polish the base with the soft nylon brush again.If you use fluorine powder for corking, we recommend the cork brush for this purpose (not included in this set. Available either individually or in the "World Cup" professional set). Work with rotary brushes with little pressure and speeds up to approximately 1,000 revolutions per minute!

With this rotary brush set, you are perfectly equipped to professionally wax your skis or snowboard.This high-quality rotary brush set consists of a handle with a short axis including hand protection, rotary brush Nylon, rotary brush Horsehair, and a rotary brush Brass. Product Features:Handle part made of anodized aluminumAxis made of stainless steel, double ball-bearing with sealed bearings for dust and moisture protectionalso fits with brushes from other manufacturersHexagonal receptacle 10 mmBrush size 115 mm widePractical tip from our ski workshop:For base cleaning, we use the brass rotary brush before the first waxing. After scraping off excess wax, we brush the base structure with the stiff horsehair brush and then polish the base with the soft nylon brush again.If you are using fluorine powder for corking, we recommend using the cork brush for it. You can purchase it individually or as part of the "World Cup" rotary brush set with a handle, four brushes, and a practical wax case.Work with rotary brushes at low pressure and speeds up to approximately 1,000 revolutions per minute!

  This steel brush meets even the highest demands in professional sports. Thanks to micro-fine wires, the ski base is perfectly freed from excess wax, revealing the structure of the base. The application is very simple: just brush over the base once or twice with little pressure, and you'll get a perfect result. The steel roto brush is the ideal complement to your wax brush set. You can also find other roto brushes and the corresponding handle here in the shop.   Product Features: Wire thickness 0.08mm Hexagonal socket 10 mm Brush size 115 mm wide   Practical tip from our ski workshop: For base cleaning, we use the brass roto brush before the first waxing (available separately). After scraping off excess wax, we brush the base structure of the board or skis with the hard horsehair brush (available separately) and then polish the base with the soft nylon brush (available separately) once again. For a final finish and to achieve a perfect result, we then use this Micro Steel Brush.   Work with roto brushes with little pressure and speeds up to approximately 1,000 revolutions per minute!    

The proven special tool for removing sidewalls. If you want to sharpen the side edges of your skis or snowboard and notice while filing that you're not hitting the edge properly anymore, but instead removing plastic from the ski/board sides, you need to trim this plastic before sharpening the edges. This sidewall trimmer is perfect for that! Height adjustable Side adjustable Reversible carbide blade

The proven special tool for removing sidewalls. If you want to sharpen the side edges of your skis or snowboard and notice while filing that you're not hitting the edge properly anymore, but instead removing plastic from the ski/board sides, you need to trim this plastic before sharpening the edges. This sidewall trimmer is perfect for that! Height adjustable Side adjustable Reversible carbide blade

Deburr the edges of your skis or snowboard with the Aluminum Oxide stone in just a few strokes.Preparing the edges with an Aluminum Oxide stone before filing significantly increases the lifespan of your files.You can also use the stone effectively to remove rust.Suitable for edge grinders or variable-angle guides.Grit: 400Size: 80 x 20 x 5 mm

Surface plane for processing the surface after the surface repair.If you have filled the damage in the surface with our repair strips, the cooled and excess material must be removed again.For this, in the first step, use our high-quality surface plane with an integrated but replaceable cross-file.In the second step, level the surface with our stainless steel blade. For larger repair works, it is recommended to restructure the surface with a structuring device.Price is for the plane including the milling fileThe file is replaceable and can be used on both sidesDimensions of the milling file: 300 mm x 30 mm, 9 TPI

Surface plane for processing the surface after the surface repair.If you have filled the damage in the surface with our repair strips, the cooled and excess material must be removed again.For this, in the first step, use our high-quality surface plane with an integrated but replaceable cross-file.In the second step, level the surface with our stainless steel blade. For larger repair works, it is recommended to restructure the surface with a structuring device.Price is for the plane including the milling fileThe file is replaceable and can be used on both sidesDimensions of the milling file: 300 mm x 30 mm, 9 TPI

Repair sticks for patching ski and snowboard bases. Simply light and drip onto the damaged area. After curing, file off any excess material and level it with a stainless steel blade. Color: see variant selection Contents: 20 pieces

Quality diamond file for use in edge sharpeners and file angles.To remove hardening on the edge, it creates a top surface again to achieve a sharp edge for as long as possible. Size 100 x 25 x 5 mm (fits in almost all edge sharpeners and file angles) Grit 300 medium/ blue     

Mit dem Edge Trick hast du deinen Kantenschleifer immer griffbereit, egal ob auf der Piste oder im Skikeller. Dieses handliche Werkzeug ist ideal, um die Kanten deiner Ski oder Snowboard schnell und präzise nachzuschleifen, wenn der Grip nachlässt. Perfekt für den Einsatz unterwegs: Dank seines kompakten Designs passt der Edge Trick problemlos in jede Jackentasche und ist leicht zu bedienen.Mit dem im Set enthaltenen Alu Oxyd Stein entfernst du mühelos den Kanten Grat, Rost oder kleinere Beschädigungen der Kante.Die feine Feile verwendest du dann um die Kante nachzuschleifen. Lieferumfang:Edge Trick (85° - 90° verstellbar)Alu Oxyd Stein blau mit 150er KörnungFeile fein (20 x 30 mm)

With the stable edge tuner and a suitable file (not included), you can easily sharpen the side edge of your alpine skis or snowboard. You can individually adjust the file angle from 88° to 85° using various spacers. With just a few strokes, the side edge will be flat and sharp again. The edge tuner is very stable with its 3mm thick stainless steel plate and weighs 250g, making it comfortable to handle. The large opening for chip removal prevents shavings from being pressed into the base.Which setting is the right one?In general, it can be said: The sharper the angle of the edges, the more aggressive the edge. This means the skis grip better and respond faster than with blunter edges. The smaller you set the angle, the sharper and more aggressive the ski becomes. For recreational skiers, we sharpen the base edges at 0.5° and the side edges at 88° in our workshop. This gives the edges a very good compromise between agility and aggressiveness. Which file is the right one?If the edge is heavily damaged, the burrs must be removed with an aluminum oxide stone before grinding. Then, we recommend using the medium file for initial grinding. After a few even strokes and an initial flat grind, we recommend switching to the fine file. Now, the edges will be ground flat properly.

With the short fine file, you have a high-quality finishing file to sharpen the side edges of your skis or snowboard. If the edge has strong burrs or has developed some rust, we recommend using the aluminum oxide stone before filing. Then, in the first pass, sharpen the edge with a medium file. Simply clamp the file in the edge tuner and use long, even strokes to flatten the side edges.After that, switch to this fine file and make the edge perfectly flat.Size: 100mm x 25mm x 5mm